很多朋友在安裝、使用卷簾門時，經常會遇到一些故障，又不知道是什么原因造成的，也不知道該如何維修，那么導軌、卷軸、簾板出問題了怎么辦？下面濟南卷簾門廠家為您分析：

Many friends often encounter some faults when installing and using the roller shutter door. They don't know what causes them or how to repair them. What if there is a problem with the guide rail, roller and shutter? Jinan roller shutter manufacturer will analyze for you:

一、導軌故障

1、 Guide rail fault

正常來講，無論是哪一種卷簾門，兩邊的導軌內部都是有一層“磨擦條”存在的，這層摩擦條的作用是避免簾板與導軌摩擦而存在的。當卷簾門無法上拉、下拉時，要檢查的就是導軌的摩擦條。摩擦條屬于易消耗品，經常推拉卷簾門會導致摩擦條損耗，如果沒有了摩擦條，卷簾門會跟導軌直接接觸，就會出現卷簾門無法上拉、下拉的故障。

Normally, no matter what kind of roller shutter door is, there is a layer of "friction strip" inside the guide rail on both sides. The function of this layer of friction strip is to avoid the friction between the shutter and the guide rail. When the roller shutter door cannot be pulled up or down, the first thing to check is the friction strip of the guide rail. The friction strip is a consumable. Frequent pushing and pulling of the roller shutter will cause the wear of the friction strip. If there is no friction strip, the roller shutter will directly contact with the guide rail, and the roller shutter will fail to pull up and down.

遇到這種情況，直接去購買摩擦條更換即可，如果自己不會更換，可以給安裝廠家打電話，讓其幫忙售后。

In this case, just go to buy the friction strip and replace it. If you can't replace it yourself, you can call the installation manufacturer and ask them to help with after-sales service.

二、卷軸故障

2、 Reel fault

卷軸除了負責將簾板卷起之外，它才存在一個隱性的拉力，有一些高檔的卷簾門內部會有一個彈簧片存在，主要作用是對簾板施加一個力，禁止卷簾門在關閉的時候彈起，在打開的時候下落。當卷簾門的卷軸出現問題時、彈簧片斷裂后，卷簾門就會出現兩種故障，卷簾門開啟時會自動下落，自動下落時又會自動彈起。

In addition to being responsible for rolling up the shutter, the roller has a hidden pull force. There is a spring leaf inside some high-end shutter doors, which is mainly used to exert a force on the shutter. It is forbidden to spring up when closing and fall when opening. When there is a problem with the roller of the roller shutter door and the spring plate breaks, the roller shutter door will have two kinds of faults. The roller shutter door will automatically fall when it is opened, and will automatically spring up when it automatically falls.

遇到這種情況，就直接將卷簾門的控制箱打開，查看彈簧片是否斷裂或脫落，斷裂了就直接更換，脫落了再將其掛回原位即可。

In this case, open the control box of the shutter door directly to check whether the spring plate is broken or falling off. If it is broken, replace it directly. If it falls off, hang it back to its original position.

三、簾板故障

3、 Curtain failure

以彩鋼條制作的卷簾門為例，卷簾門的簾板是由多塊彩鋼條壓制成特制的形狀，然后互相拼接在一起的，然后使用鉚釘、固定條等將簾板固定在特定的位置里。當簾板出現故障時，比如固定條磨損嚴重、鉚釘脫落等，就會造成簾板斷裂、變形、扭曲的情況，導致卷簾門無法正常使用。

Take the roller shutter made of color steel bars as an example. The shutter of the roller shutter is made of a number of color steel bars pressed into a special shape, then spliced together, and then fixed in a specific position with rivets, fixing strips, etc. When the curtain board fails, such as severe wear of the fixing strip and falling off of the rivet, it will cause the curtain board to break, deform and twist, resulting in the failure of normal use of the rolling shutter door.

遇到這種情況，可以直接在松動的卷簾門上打孔，然后重新使用鉚釘槍進行固定，然后再更換兩邊的固定條即可，也可以直接更換變形的簾板，然后再固定。

In this case, you can directly punch holes in the loose roller shutter door, then use the rivet gun again to fix it, and then replace the fixing strip on both sides, or you can directly replace the deformed shutter, and then fix it.

不過現在有很多卷簾門都是電動的，與器械卷簾門不同的是，它額外配置了電機、電機導軌、遙控設備等。這類卷簾門出現故障的原因比機械卷簾門更加復雜，不建議個人用戶自行維修。您還有什么卷簾門事項就來咨詢我們http://m.ifxf.cn吧！

However, many roller shutter doors are electric now. Unlike the instrument roller shutter doors, they are additionally equipped with motors, motor guides, remote control equipment, etc. The reason for the failure of this type of roller shutter door is more complex than that of the mechanical roller shutter door. It is not recommended for individual users to repair by themselves. If you have any questions about rolling shutter door, please contact us http://m.ifxf.cn Come on!