卷簾門的限位開關有兩個，一個是上限位，有一個是下限位，能夠控制開關的開啟和關閉，調節的時候有兩個人來操作，一個人要在上邊調節轉動杠桿的位置，另外一個人需要調節卷簾門的上下。具體操作的時候，將上面的一個卡片撥動到適合的度數，能夠脫離螺母或者松開上面的螺釘。將門將卷簾門調到合適的位置之后，再將螺母壓住開關上的滾輪，能夠聽到咔嚓的一聲，也就是卡片已經卡入到相應的槽中，這時候就可以將螺釘擰緊。如果位置不合適，還可以再進行調整，直到的位置為止。

　　There are two limit switches for the roller shutter door, one is the upper limit and the other is the lower limit, which can control the opening and closing of the switch. When adjusting, it is best to have two people to operate. One person needs to adjust the position of the rotating lever on the upper side, and the other person needs to adjust the up and down of the roller shutter door. When performing specific operations, move one of the cards on top to the appropriate degree to detach the nut or loosen the screw on top. After adjusting the roller shutter door to the appropriate position, press the nut onto the roller on the switch. A click can be heard, indicating that the card has been inserted into the corresponding slot. At this point, the screw can be tightened. If the position is not suitable, further adjustments can be made until the optimal position is reached.

　　使用電動卷閘門需要注意哪些方面？

　　What should be noted when using electric roller gates?

　　1、使用之前，應該詳細觀察一下電動卷閘門的門扇或者是門軌是否有出現變形卡住等現象，還應該觀察一下控制盒是否有安裝牢固，是否有電流外露出來。若有發現問題的話，則需要及時進行處理，當故障解決以后，才可以使用電動卷閘門。

　　1. Before use, it is necessary to carefully observe whether the door leaf or door rail of the electric rolling gate is deformed or stuck, and also observe whether the control box is securely installed and whether there is any exposed current. If any problems are found, they need to be dealt with in a timely manner. Only after the fault is resolved can the electric roller shutter be used.

　　2、當電動卷閘門上升或者是下降的時候，使用者不可以隨意離開現場，應該仔細觀察電動卷閘門的開啟或者是關閉時的運行狀態，若有聽到異常響聲或者是門扇出現運行不穩的現象的話，則需要及時安裝停止按鈕，并且需要及時把電源切斷掉，然后讓維修人士上門幫忙進行檢測和維修，當故障解決以后，才可以繼續使用電動卷閘門。

　　2. When the electric roller shutter rises or falls, the user must not leave the site at will. They should carefully observe the operating status of the electric roller shutter when it is opened or closed. If there is any abnormal noise or unstable operation of the door leaf, a stop button should be installed in a timely manner, and the power should be cut off in a timely manner. Then, professional maintenance personnel should come to the site for inspection and maintenance. Only after the fault is solved can the electric roller shutter be continued to be used.

　　3、當電動卷閘門上升或者是下降的時候，還應該仔細觀察一下電動卷閘門的相關限位裝置是否可以自動停止，若不可以的話，則應該手動進行停止，當限位裝置被調整好以后，才可以繼續使用和操作。。

　　3. When the electric roller shutter rises or falls, it is also necessary to carefully observe whether the relevant limit devices of the electric roller shutter can automatically stop. If not, it should be manually stopped. Only after the limit devices are adjusted can they continue to be used and operated..

　　以上就是有關：濟南卷簾門  的介紹，想了解更多的內容請點擊：http://m.ifxf.cn 我們將會全心全意為您提供滿分服務，歡迎您的來電！